InfoComm 2020 Connected Spotlight

Alcons Audio’s CB181sl

Alcons Audio

Alcons Audio’s CB181sl is a direct-radiating slim subwoofer system, designed as a screen system low-frequency extension, as well as a rear-subwoofer in immersive surround systems, delivering tight and accurate bass and sub response with very low distortion. The direct-radiating 18” long excursion woofer with large, 4” voice-coil is mounted in an optimally vented chamber, increasing overall output while minimizing port-compression. Specific attention has been paid to obtain a linear response in the operating bandwidth, while handling low-frequency transients with maximum control. The ultra-slim enclosure design, only 11”/27.5cm deep, provides for stacking, flying or wall-mounting. The side-oriented reflex vent enables the cabinet to be closely mounted behind the screen without chance of screen resonance. The CB181sl is also available with front-venting for in-wall baffle mounting. The Signal Integrity Sensing pre-wiring ensures complete cable/connector compensation between the CB181sl and the ALC amplified loudspeaker controller, significantly increasing response accuracy, regardless of cable length and system impedance.

Alcons Audio

This post is part of Sound & Communications’ InfoComm 2020 Connected New Product Spotlight.

S&C august 2021 digital edition
Previous ArticleNext Article
Send this to a friend