Newsletter

VGA, HDMI, MHL Auto-Switching Wall-Plate with HDBaseT™

The UHBX-SW3 is a kit comprised of a multi-input wall-plate sender and an HDBaseT receiver. The wall plate accommodates 2 HDMI and 1 VGA inputs with audio. It also supports MHL (Mobile High-Definition Link) with phone-charging feature to allow video presentation from a smart-phone using just a passive cable. The VGA input can also accept YPbPr Component video. The wall plate can manually or automatically switch between the various video inputs and extend the video using HDBaseT™ standard.

To control the power on/off function of the remote display, the wall plate can generate RS232 and IR control signals which are extended using the same Cat 6 cable. VGA and HDMI resolutions are supported: 4K (UHD) to 330 ft (100m) and 1080p to 500 ft (150m). The wall plate is powered through the cable from the receiver using PoH (Power-over-HDBaseT). A compatible receiver (UHBX-R-PSE) is provided in the kit.

The wall plate scales the VGA output to 1080p which is supported by all HDMI TVs. Audio connected to the 3.5mm input allows connection of audio players.

The UHBX-SW3 complies fully with HDBaseT Alliance’s design specifications and may be connected to displays or projectors with HDBaseT inputs.  In that case, a PoH compliant power inserter would be needed to power the wall plate.

HallResearch_525x80_UHBX-SW3

Previous ArticleNext Article
 
Send this to a friend